[. . . ] English
MVH-AV270BT MVH-AV170
RDS AV RECEIVER
Operation Manual
Contents
Thank you for buying this Pioneer product. Please read through these instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this document in a safe place for future reference. Switching visibility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Entering the PIN code for Bluetooth wireless connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Displaying the device information. . . . . . . . . . . . . . . . . . . . . . 8 Clearing the Bluetooth memory. . . . . . . . . . . . . . . . . . . . . . . . 8 Updating Bluetooth software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Displaying the Bluetooth software version. . . . . . . . . 9 Setting the slideshow interval. . . . . . . . . . . . . . . . . . . . . . . . . . 17
■ iPod. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Connecting your iPod. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Starting procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Selecting song or video sources from the playlist screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Selecting a shortcut. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Removing a shortcut. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
■ Common operations. . . . . . . . . 29
Setting the time and date. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Changing the wide screen mode. . . . . . . . . . . . . . . . . . . . . 29
Important
The screens shown in the examples may differ from actual screens, which may be changed without notice for performance and function improvements.
functions. . [. . . ] p Do not turn off the engine while saving the adjusted position data. Displaying the “System” setting screen on page 22
Setting the dimmer duration in day or night
p You can use this function when “Dimmer Trigger” is set to “Manual”. p This setting is available only when you stop your vehicle in a safe place and apply the parking brake. Displaying the “System” setting screen on page 22
1 Display the “System” setting screen. 2 Touch [Touch Panel Calibration].
p When the cursor for on time setting is placed on the left end and the cursor for off time setting is placed on the right end, the dimmer available time is 24 hours.
placed on the right end, the dimmer available time is 0 hours.
3 Touch four corners of the screen along the arrows.
The adjustment results are saved. Proceed to 16-point adjustment.
1 Display the “System” setting screen. 2 Touch [Dimmer Settings].
Setting the time and date on page 29
The time display of the dimmer duration adjusting bar is depending on the clock display setting.
4 Press . 5 Press
Adjusting the picture
You can adjust the picture for each source and rear view camera.
once again.
The target indicates the order.
6 Gently touch the center of the “+” mark displayed on the screen. When you press and hold , the adjustment is canceled.
● Day (default): Turns the dimmer manually to off. ● Night: Turns the dimmer manually to on.
3 Touch [Day/Night] to switch the following items.
CAUTION
For safety reasons, you cannot use some of these functions while your vehicle is in motion. To enable these functions, you must stop in a safe place and apply the parking brake. Refer to Important Information for the User (a separate manual).
Setting the dimmer duration optional
You can adjust the time that the dimmer is turned on or off. p You can use this function when “Dimmer Trigger” is set to “Time”. p This setting is available only when you stop your vehicle in a safe place and apply the parking brake. Displaying the “System” setting screen on page 22
1 Display the screen you wish to adjust.
Displaying the “System” setting screen on page 22
2 Display the “System” setting screen. 3 Touch [Picture Adjustment].
The adjustment results are saved.
7 Press and hold .
Setting the dimmer
Setting the dimmer trigger
p This setting is available only when you stop your vehicle in a safe place and apply the parking brake. Displaying the “System” setting screen on page 22
1 Display the “System” setting screen. 2 Touch [Dimmer Settings].
The “Duration Setting” screen appears.
3 Touch [Dimmer Duration].
1 Display the “System” setting screen. 4 Touch the item.
4 Touch the time display to activate the adjustment mode. Each touch of or moves the cursor backward or forward in the 15 minute width. When the cursors are placed on the same point, the dimmer available time is 0 hours. When the cursor for off time setting is placed on the left end and the cursor for on time setting is
● Brightness: Adjusts the black intensity. [. . . ] PAL/NTSC/PAL-M/PAL-N/SECAM compatible
FM tuner
Frequency range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 dBf (0. 8 µV/75Ω , mono, S/N: 30 dB) Signal-to-noise ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 dB (IEC-A network)
Audio
Maximum power output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . •50 W × 4 ch/4 Ω •50 W × 2 ch/4 Ω + 70 W × 1 ch/2 Ω (for subwoofer) Continuous power output . . . . . . 22 W × 4 (50 Hz to 15 kHz, 5 %THD, 4Ω LOAD, Both Channels Driven) Load impedance . . . . . . . . . . . . . . . 4 Ω (4 Ω to 8 Ω [2 Ω for 1 ch] allowable) Preout output level (max) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]